CAOPONR在线视频进入,亚洲国产不卡久久久久久,狠狠狼鲁亚洲综合网,欧美色偷偷

EPC Products Civil Engineering Testing Instruments Structural and Materials Testing Highway and Bridge Inspection Asphalt Penetration, Ductility and Softening Point of Asphalt Ductility Test Standard Ductilometer for Ductility test - Ductimeter
產(chǎn)品中心
Standard Ductilometer for Ductility test - Ductimeter

Model:

Use:

Standard:

Related Products
MAIN FEATURES
  • 4 tension line (briquette capacity) x 1500 mm 
  • Easy and free access to the large testing space
  • Closed-loop PID temperature control system
  • Stainless steel insulated water bath 
  • Exclusive in-built thermoregulation system compensating the exchange of heat and cooling, resulting in a very strict temperature control, optimized by the connection to chiller (optional)
  • Adjustable speed range from 5 to 100 mm/min
  • High carriage return speed of 500 mm/min for greater productivity
  • Elongation measurement by encoder read on display


GENERAL DESCRIPTION
 
The ductility test is performed for determining the ductility of bituminous materials by measuring the elongation before breaking when two ends of briquette specimens are pulled apart at a specified speed and temperature.

This model fully satisfies and exceeds ASTM D113, ASTM D6084, AASHTO T51 and EN 13398 requirements. A water chiller (see accessories) is ideal for this and may already be available in the laboratory but mains water can also be used. If the ambient temperature goes over 25° C, as in the tropical areas, and cold mains water is not available, the use of a water chiller is mandatory.

Water bath

Insulated stainless steel water bath with a heating system located over the entire base surface and a cooling coil (for connection to water mains or chiller) distributed over the three side walls assuring temperature uniformity without water turbulence inside the bath. All parts in contact with water are made of stainless steel.

Carriage displacement

Double-screw rods and mobile carriage enable test speeds from 5 to 100 mm/min. The system also permits the fast return of the carriage at the end of the test (500 mm/min) to reduce dead time and increase productivity. The carriage return is automatic so manual intervention is not required.

Temperature control
  • A closed-loop PID system assures constant temperature
  • Plate-type base heaters give better temperature uniformity
  • The thermoregulation system is based on controlling the heater (which increases the temperature of the bath) and the flow rate of the cooling coil (which decreases the temperature). This important feature assures control of the temperature within strict limits and permits the use of suitable standard water chillers
Machine control and elongation measurement
Control panel with digital display to set the testing speed: 5 to 100 mm/min, with the carriage return function. Elongation measurement by encoder.

The machine can be completed with a transparent cover

Technical Specifications

Models 81-PV10A02
81-PV10A04
Conforms to Standards   EN 13398
ASTM D113
ASTM D6084
AASHTO T51
Machine control by Digital display panel
Thermostatically controlled 
water bath temperature
25°C
Temperature control system Heater and cooling coil for connection to cold water or water chiller
Structure Stainless steel tank
Briquettes capacity 4
Max carriage travel 1500 mm
Testing speed Adjustable from 5 to 100 mm/min
Elongation measurement by Encoder (linear scale)
Carriage return speed 500 mm/min
Power rating (approx.) 1200 W
Transparent cover As optional
Overall dimensions (l x d x h) 2434 x 412 x 385 mm
Weight approx. 100 kg
Project Case
Solution
Download
相關(guān)標(biāo)簽
Asphalt Testing