CAOPONR在线视频进入,亚洲国产不卡久久久久久,狠狠狼鲁亚洲综合网,欧美色偷偷

The iCone Calorimeter was the first in FTT’s new interactive range of calorimeters, called the i-series. It features the latest technology in control and automation making it the most advanced, reliable and user- friendly Cone Calorimeter in the world. The iCone was launched in 2013. The iCone series is now completed by two semi--automatic models – the iCone mini which features a separate gas analysis rack and the iCone classic which has a fixed gas analysis console mounted on the instrument main frame. These have replaced the FTT Dual Cone and Standard Cone respectively. The iCone has undergone further modification on its fire model and glass protective screen. This upgrade version is now named as the iCone2? , also for being the most advanced model in the range. The iCone series brings calorimetry to a new level of automation and make it available at different budget levels.

A full system on the iCone mini  and iCone classic  consists of:

• Temperature Controller
• Motorised Heat Shield
• Spark Ignition
• Specimen Holders
• Specimen Spacers
• Heat Resistant Glass Protective Screen
• Load Cell
• Gas Sampling
• Combustion Gas Analysis
• Smoke Obscuration Measurement
• Exhaust System
• Heat Flux Meter
• Calibration Burner
• Data Acquisition
• ConeCalc Software – it is available in multi-languages including English, French, German, Spanish and Japanese. The user interface is a Windows based system with “user friendly” push button actions and standard Windows data entry fields, drop down selectors, check boxes and switches capable of:
  ? Instrument control and showing status of the instrument
  ? Calibration of gas analysis instrumentation and storage of calibration results
  ? C-factor calibration with the use of mass flow controller
  ? C-factor calibration via pool fire (ethanol) routine
  ? Collecting data generated during a test
  ? Calculating the required parameters
  ? Presenting the results in a manner in accordance with ISO 5660-1 and ASTM E1354
  ? Exporting calculated data to CSV (comma separated variable) files for quick transfer to spreadsheets.

Unique Features of FTT’s iCone mini  and iCone classic:

• Remote cone assembly positioning control, so that heater- specimen surface separation can be adjusted pre and mid test, to facilitate testing of intumescing or thermally distorting specimens
• Programmable heat flux exposure. Up to 10 consecutive heat flux ramping or holding can be programmed
• Motorised heat shield to protect specimen from heat exposure before test
• Motorised positioning and control of spark igniter to ignite the combustion gases from the specimen
• Automatic/semi--automatic/manual calibration by ConeCalc Software
  Load cell resolution of 0.01g and load capacity up to 8.2kg (Sartorius cell)
  Load cell mounted on an independent table to avoid any vibration from exhaust fan
• Fire model protection alarm system
• Online support and remote control of instruments from FTT for internet connected system
• Optional larger Cone ?re model for testing specimens with very low heat release rates. 150mm × 150mm specimens are exposed to uniform heat flux over entire surface
• Optional fully integrated FTIR gas analysis system supplied with heated sampling module, heated lines/probes and PLC controller

Options:

• Carbon Dioxide and Carbon Monoxide – NDIR gas analysers optionally available.
• Hydrogen Chloride – heated supply lines and gas analyser
• Controlled Atmosphere Attachment – for low oxygen sample analysis
• FTIR Toxicity Test System