CAOPONR在线视频进入,亚洲国产不卡久久久久久,狠狠狼鲁亚洲综合网,欧美色偷偷

EPC Products Industrial Testing Metal Testing A1550 INTROVISOR
產(chǎn)品中心
A1550 INTROVISOR

Model:A1550 INTROVISOR

Use: visualize the internal structure of the object as real-time section imaging (B-Scan) making the results interpretation much easier than with a traditional flaw detector.

Standard:JB/T7524-1994;GB/T11345-2013

Related Products

A1550 INTROVISOR

The universal portable ultrasonic flaw detector-tomograph with TFM technology (Total Focusing Method) visualize the internal structure of the object as real-time section imaging (B-Scan) making the results interpretation much easier than with a traditional flaw detector.

The tomograph uses various types of phased array transducers comparable by size with traditional transducers. Thanks to our special signal processing algorithms a phased array probe substitutes a whole kit of standard transducers traditionally used for testing.

PRODUCT DESCRIPTION

The universal portable ultrasonic flaw detector-tomograph with TFM technology visualize the internal structure of the object as real-time section imaging (B-Scan) making the results interpretation much easier than with a traditional flaw detector.

The tomograph uses various types of phased array transducers comparable by size with traditional transducers. Thanks to our special image reconstruction algorithm the PA transducer substitutes a whole kit of standard transducers traditionally used for testing.

A1550 IntroVisor operates basing on the principle of TFM virtual focusing to every point of the visualized section, providing high efficiency and best results for spatial resolution and sensitivity.

The А1550 IntroVisor tomograph is designed to meet the challenge of quick and efficient flaw detection at metal, plastic and composite objects with detailed documenting of the results.

Special software for 3D reconstruction of the welding joints

APPLICATION

Weld joints inspection.

Locating corrosion, cracks, internal stratifications and other flaws.

locating and sizing up flaws (discontinuities and inhomogeneities) in metal and plastic objects.

Thickness measurement.

Real-time imaging of the object internal structure.

Option to use various types of ultrasonic waves:
-shear waves to inspect welds overlapping angular range used by standard methods of ultrasonic testing;
-longitudinal waves to inspect base metal.

Enhanced resolution and sensitivity. Possibility to measure discontinuity flaw size.High testing efficiency.

Can operate as a tomograph (B-Scan) and as a traditional flaw detector (A-Scan).

Weld joints scanning mode (C-Scan) with saving results to memory.

Reflecting images of vertically oriented flaws.

Project Case
Solution
Download
相關(guān)標簽