CAOPONR在线视频进入,亚洲国产不卡久久久久久,狠狠狼鲁亚洲综合网,欧美色偷偷

An Automated Monitoring Equipment that assists in the installation of augered cast-in-place (ACIP)/continuous flight auger (CFA) and drilled displacement piles by displaying pumped grout/concrete as a function of depth in real time.

• Records and displays accurately measured, pumped grout volume and auger depth in real time, optionally with grout pressure or torque measurements and RPM

• Installation log results printed immediately on a small field printer

• May be installed in any type of dedicated or general purpose drilling rig equipment

• Can be used in low headroom applications

• Optional PIR viewer allows inspector or supervisor to simultaneously monitor each installation

The PIR is an Automated Monitoring Equipment that assists in the correct installation of augered cast in place (ACIP) / continuous flight auger (CFA) and drilled displacement piles by displaying target versus actual poured concrete volume in real time.

The equipment may be installed in any crane, including those operating with low headroom. As the crane proceeds from pile to pile, the operator easily monitors the installation of every pile on the job. At the same time, an inspector or supervisor may follow the installation on the wireless PIR-Viewer.

The key parameters for a precise installation are pumped grout volume and auger depth. The PIR accurately records and displays both in real time. The equipment consists of a main unit installed in the crane cabin, a depth measurement device*, a Foxboro magnetic flow meter, a pressure transducer that gives an indication of the auger torque and an auger rotation measurement. The Angle Analyzer, a device that measures pile angle of installation, is an optional accessory, as is the PIR-Viewer.

The PIR is totally operated through the touch screen display of the main unit. Its large readouts provide useful, easy to see information to the crane operator.

Results may be printed in the form of an installation log, on a small field printer, immediately after each pile is completed. Once data is downloaded to a computer the PIR-PLOT Software performs further analysis and outputs installation and productivity reports, along with graphs of key parameters versus depth.

The Pile Installation Recorder conforms with the ”Federal Highway Administration Geotechnical Engineering Circular (GEC) #8” – and with the Deep Foundations Institute ”Augered Cast-In-Place Piles Manual”.

Technical Specification

Main Unit

• Size: 60 x 180 x 228 mm
• Weight: 1.5 kg
• Mounting: Inside crane cabin
• User Interface: High Visibility Color LCD with LED Backlighting
• Power: 12 or 24 V DC (Typically uses crane battery).
• Temp Range: 0° to 40° C, operating; -20° to 65° C storage
• Electronics: PC compatible processor, running Microsoft Windows® 10; 32-bit Microprocessor with 10-bit Analog to Digital Converter
• Data Storage: Internal 128 GB Solid State Drive (SSD)
• Data Export: USB
• Printer Interface: USB

Flow Tube-Meter

• Type: Magnetic Flow Meter
• Mounting: In line with main grout line, 76 to 152mm diameter
• Size: 775mm x 405mm x 470mm
• Weight: 47 kg
• Max Flow Rate: 625gpm with 76mm grout line; 2440gpm with 152mm grout line
• Accuracy: +/-2%

Grout Pressure Measurement Unit

• Type: Pressure transducer
• Mounting: On magnetic flow tube
• Max Range: Up to 1000 PSI
• Output Signal: 4-20mA output

Torque Measurement Unit

• Type: Pressure transducer (hydraulic pressure applied to gear motor – “torque pressure” – relates to auger torque)
• Mounting: On Hydraulic line powering the gear box
• Max Range: Up to 10000 PSI
• Output Signal: 4-20mA output

Depth Measurement Unit

Wireless Rotation Measurement Unit

• Type: Proximity switch
• Mounting: Mounts on gear box
• Size (diameter x length): 18mm x 50mm
• Weight: 114g
• Functionality: Normally open
• Max Switching Frequency: 200 Hz
• Sensing range: 10 mm
• Repeatability: .01 mm

Wireless Transmitter

• Size: 60mm x 76mm x 175mm
• Weight: 0.7 kg
• Transmission Range: 100m
• Frequency: 2.4Ghz
• Electronics: 32-bit 24 MHz microcontroller, 12-bit digital to analog converter
• Mounting: On auger gear box
• Power: Rechargeable battery, size 60mm x 76mm x 175mm, run time at least 24 hours
• Temp Range: 0° to 40° C, operating; -20° to 65° C storage

Other

• Paper Summary Print Out for each Pile
• User selectable depth increment
• Results in SI or English units
• Includes PIRPLOT Software License
• One-year warranty on main unit
• Technical manual provided in PDF form on a USB drive