CAOPONR在线视频进入,亚洲国产不卡久久久久久,狠狠狼鲁亚洲综合网,欧美色偷偷

EPC Products Civil Engineering Testing Instruments Geotechnical Testing In-situ Testing Rock Mechanics Testing The Flate Dilatometer Test Marchetti Flat Dilatometer
產品中心
Marchetti Flat Dilatometer

Model:DMT

Use: consists of a flat blade which is driven into the soil

Standard:GB 50021-2001,JTS133-2013,JTG_C20-2017,TB 10012-2007,GB 50307-2012,JGJ 340-2015,ASTM D6635-15

The Marchetti Flat Dilatometer (DMT) consists of a flat blade which is driven into the soil. The blade has a fine circular metal membrane which can be expanded horizontally in the soil using pressurized gas.


扁鏟側脹儀,扁鏟側脹儀價格,扁鏟側脹試驗儀扁鏟側脹儀,扁鏟側脹儀價格,扁鏟側脹試驗儀

The pressure P0 which is needed to start membrane movement is measured, as is the pressure P1 which is required to produce a displacement of 1.1 mm in the centre of the membrane. These two measurements are taken at regular intervals, usually of 20 cm.

The penetration can be carried out statically, by means of a CPT truck, allowing both test methods to be used as part of a single survey campaign, without additional costs.

 

Sample conservation

As well as being a quick and repeatable test which causes minimal disturbance to the soil, the DMT has the following specific advantages:

  • It is a two parameter test, P0 and P1, the first of which gives direct information about the soil tension, a factor which governs soil behaviour.
  • The calculation of settlement of shallow foundations is one of the principal applications of this survey, especially when dealing with sands where edometric surveys cannot be carried out.
  • It is an excellent test for monitoring ground treatments.
  • Compacting is shown by an immediate increase in KD and M, even in the case of slight changes in density.
  • Location of surface breakage of slopes in clayey soils.
  • P-y curves for piles with lateral load.
  • Determination of liquefaction potential of sands.
Project Case
Solution
Download
相關標簽
Marchetti