CAOPONR在线视频进入,亚洲国产不卡久久久久久,狠狠狼鲁亚洲综合网,欧美色偷偷

EPC Products Education Fluid Mechanics Series C9 Flow Meter Demonstration Unit
產(chǎn)品中心
C9 Flow Meter Demonstration Unit

Model:C9

Use:Flow Meter Demonstration Unit

Standard:

Related Products
The Armfield Flow Meter Demonstration Unit is a self-contained facility to demonstrate the important characteristics of flow meters.
The main elements are a service module and flow meter support stand.
A self-priming centrifugal pump draws water from the sump tank in the service module and delivers it to a flow meter test pipe.
Industrial-type flow meters mounted in test sections can be fitted into the test pipe quickly and easily. These meters have been chosen to give a variety of different metering principles and degrees of
sophistication and accuracy. Some of the meters are calibrated directly in units of flow, while others involve the use of calibration charts.

The pressure drop across each of the flow meters can be measured by using either the one-metre pressurised water manometer or the 0.5-metre mercury manometer supplied. 

Ported manometer connection valves ensure rapid bleeding of all manometer pipework. A facility exists to admit air into the hydraulic stream

to demonstrate the effect on the meter’s accuracy. The discharge from the test section is controllable and is fed through a diffuser into the channel of the service module. A V-notch and rectangular notch weir can be fitted into the service module.


An auxiliary channel (C9-15) accommodates the broad-crested and crump weirs, as well as the ‘H’ flume and Washington flume. Levels in the channel can be determined by using the Hook and Point Gauge (H1).
Water discharging from the flow meter on test is collected in a volumetric tank where the flow may be determined absolutely.
This tank is stepped to accommodate high or low flow rates and incorporates a stilling baffle to reduce turbulence. A remote sight tube and scale connected to a tapping in the base of the volumetric tank enable an instantaneous indication of water level. Water is returned
to the sump tank by a dump valve. The basic system incorporates a reference flow meter, which has been chosen for reliability and accuracy. This meter remains installed whereas other meters are selected from their storage position on the apparatus and tested as desired.

In addition to being a valuable teaching aid, the apparatus brings to the laboratory a selection of instruments that can be used to support student project work. A full set of instructions is provided, including details for testing and comparison of flow meters.


Technical specifications

Maximum flow rate

2.3l/s

Reservoir capacity

140l

Volumetric  tank capacity

40l

Nominal  bore  of pipework

38mm

Length of removable test pipe

750mm

Pump motor rating

0.55kW

Overall dimensions

Length

3.50m

Width

1.00m

Height

1.50m

Packed and crated shipping specifications

Volume

3m3

Gross weight

400Kg



Ordering specification

 A self-contained apparatus to demonstrate the characteristics of flow meters used in measurement of water flow through pipes or open channels

 Service module with reservoir, volumetric measuring tank and pump

 Reference paddle wheel meter with a digital indicator is permanently fitted

 Metering devices available in various combinations to suit coursework

 Selection from 14 devices:

  Venturi

  Orifice

  Pitot

  Shunt gapmeter

  Swinging flap

  Volumetric rotary piston

  Electromagnetic

  Helical rotary

  Inferential multi-stream

  Current meter

  Broad Crested Weir

  Crump Weir

  ‘H’ Flume

  Washington Flume

 Quick and easy removal of test meters for evaluation and inspection

 Air entrainment facility

 Meters can be used independently to support research or student project work

 User instruction manual provides installation, commissioning and maintenance data, together with project exercises





Project Case
Solution
Download
相關(guān)標(biāo)簽
Armfield,C9,Flow Meter Demonstration Unit