Model:McSEIS-AT
Use:Compact and light-weight data logger of Passive wave survey for 3ch
Compact and light-weight data logger of Passive wave survey for 3ch (horizontal and vertical)
McSEIS-AT is an epoch-making microtremor exploration system that can measure S-wave velocity structures in three dimensions.
Its light weight of 1.6 kg and wireless capability make on-site measurements faster and more efficient.
You can check the operating status of the GPS, network and battery with the LED light on the side of the main unit. The power ON/OFF can also be switched by reversing the instrument several times.
The captured data can be downloaded to PC via Wi-Fi and analyzed with the dedicated software “SeisImager”.
Channel | 3 channels (Horizontal and Vertical) |
---|---|
Resolution | 24 bit |
Pre-amp Gain (PG) | 0, 6, 12, 18, 24, 30 or 36 dB |
Sampling Rate | 4 and 10 mS |
Bandwidth (-3 dB typ) | 0.2 Hz to 100 Hz @ 4 mS, 0.08 Hz to 40 Hz @ 10 mS |
Dynamic Range | 129 dB @ 4 mS, 12 dB (typ) |
Distortion | < 0.001 % @ 25 Hz, 4 mS (typ) |
CMRR | > 90 dB @ 60 Hz |
Maximum Input | ±2.4 V @ 0 dB, ±0.6 V @ 12 dB, ±0.15 V @ 24 dB |
Noise Level | 0.70 mVrms @ 4 mS 12 dB, 0.12 mVrms @ 4 mS 36 dB |
Input Impedance | 20 KΩ |
Internal Memory | 8 GB (Expandable Up To 32 GB) |
Data Uploading | Available for data uploading with WiFi |
Geophone Operation Check | When the geophone is vibrated, the LED light of the main unit lights up. |
Connector | Input Connectors for Geophone (19 pin), Charging, USB (8 pin) |
Power | Internal Battery (9 AH Nickel Hydrogen Battery) |
Charging | 9 to 14 hours |
Environmental status | Equivalent to IP67 |
Dimensions | 140 (W) x 102 (H) x 142 (D) mm |
Weight | 1.6 kg |
Operating Temperature | -20 to +55 ?C |
Software | Automatic Analysis of Recorded Data via WiFi (Using "SeisImager" software) |