最新亚洲国产手机在线,欧美黑人精品一区二区不卡

The FT74XA is compact, mobile and easy to install. It has an integral pressurised hot water generator and requires only electricity and cooling water to operate making it ideal for confined spaces with limited services available in some laboratories.

Operation with either plate or tubular heat exchangers means a wide range of product viscosities can be handled. A progressive cavity feed pump ensures that flow rates are independent of viscosity/backpressure changes and allow a maximum operating pressure of 10 bar.

Typical processing flow rates are 10-20 L/h with holding temperatures up to 150°C. At pasteurisation temperatures flow rates of up to 60 L/h are achievable.

Cleaning is in place (CIP) utilises the feed pump in high flow rate mode and there is a centrifugal pump CIP option (FT74XA-52) which generates very high cleaning velocities to deal with products that

are particularly difficult to clean.

Sterilisation (SIP) of the system is controlled from the touchscreen. System sterilization time and temperature are defined and key temperature sensors are monitored to ensure the entire system satisfactorily completes the SIP cycle.

Automatic pre-heat control (FT74XA-46) offers an independent hot water circuit and the product pre-heat temperature is set via the touchscreen.

The system is well instrumented for both process and services with all sensors displayed on the touchscreen and recorded values can be seen graphically and saved to USB datastick for further analysis.

Technical specifications
FT74XA Heat Exchanger Service Unit
Feed pump
Progressing cavity variable-speed pump, with standard and high flow modes.
Particulate handling	0.8mm
Fibre handling	25mm
Standard flow	10-30 l/hr
High flow	Up to 120 l/hr
Pressurised water circulator
Water capacity	4.0 litres
Pump circulation rate	Variable up to 6 l/m
Water temperature	165?C maximum
Safety cutouts	Low level
	High pressure
	Mechanical pressure relief valve
Heating duty	4 or 6 kW

Number of tubes
Option	Pre-Heat	Main	Cooling	Chilling
FT74XA-20	1	2	2
FT74XA-24	1	2	2	2
Tube diameter
(product side)		8.1mm
Overall diameter		15.8mm
Length (heated):		800mm
Material		316 stainless steel
Assembled test pressure		15 bar
Working pressure		10 bar (maximum)
Standard holding tubes		2s and 15s

Number of plates
Option	Regen/ Pre-Heat		Main	Cooling	Chilling
FT74XA-30	10		9	10
FT74XA-30 + (-33)	10		9	10	10
FT74XA-30 + (-34)	10 +4		9 +4	10
FT74XA-30 + (-33) + (-34)	10 +4		9 +4	10	10
Plate heat exchangers
Plate overall dimensions		75 x 115mm
Effective diameter		3.0mm
Plate thickness		0.5mm
Wetted perimeter		153.0mm
Materials
Plates		316 stainless steel
Gaskets		Food-grade silicone
Working pressure		10 bar (max)
Standard holding tubes		2s and 15s

Overall dimensions
Length	0.90m
Width	0.85m
Height	1.40m
Packed and crated shipping specifications
Volume	2.1m3
Gross weight	380Kg

CAOPONR在线视频进入,亚洲国产不卡久久久久久,狠狠狼鲁亚洲综合网,欧美色偷偷